Denver Parks and Recreation publishes a list of loop trails inside city parks, each with a length. Sorted by distance, the list gives a quick way to pick a walk or run, and the city's closure notices show what to check before heading out.

How these loops were chosen

The loops below come from the "Park Loops" table on the city's Trails page, which lists 16 loops across 10 parks. This guide covers seven of them, picked to span short, medium and long distances in parks with different settings: lake, city park and neighborhood. Lengths are the city's published figures, and the loop maps for Cheesman, Sloan's Lake, Washington Park and Harvey Park carry the same distances. Urban parks are open daily from 5 a.m. to 11 p.m., according to the city's Parks and Recreation contact page.

Short loops (under 1 mile)

Ferril Lake Loop, City Park: 0.9 mile. The lake loop circles a lake in Denver's largest urban park, more than 300 acres. The city is rebuilding the park's bandstand after a March 2026 fire, and the city lists the bandshell as closed from March 2026 to June 2027. The city says general access to the park should stay open, and the area around the bandstand is fenced off.

Harvey Park Lake Loop: 0.4 mile. The shortest loop on the city's list. The city's project page says Harvey Park is getting new playground equipment and site furnishings under the 2021 Rise GO Bond, so expect work areas near the park.

Medium loops (1 to 2 miles)

Cheesman Park Inner Loop: 1.1 miles, and Outer Loop: 1.4 miles. Cheesman Park covers 80 acres in Capitol Hill. The city lists the picnic site as closed and the pavilion under an advisory from October 2026 to December 2027, during playground, picnic and sidewalk improvements. The project page says the work includes improving the walking path between the Pavilion and Denver Botanic Gardens. Construction starts fall 2026 and finishes winter 2027 on that page's schedule, while the closures list runs through December 2027.

Long loops (2 miles and up)

Washington Park Outer Loop: 2.5 miles. The city's loop map for the park also has shorter loops on the city's list: Meadow 0.9, Grassmere Lake 0.8 and Smith Lake 0.6 miles, plus a 2.2-mile Roadway Loop.

Sloan's Lake Loop: 2.6 miles. The city's 2027 closures list shows the jetty area closing from April 2027 to May 2028 for a boathouse renovation, with a detour on the 5K course. A separate shoreline restoration closes the 5K course from November 2027 to April 2028. Both closures start in 2027.

City Park Mile High Loop: 3.1 miles. The longest loop on the city's list. The city's City Park Projects page says multiple projects may be underway in the park at any time, including waterway, nature play and Lily Pond work, so check that page for detours before going. Its waterway-work closure of a Mile High Loop section was scheduled to end in summer 2025.

So what

Harvey Park's 0.4-mile lake loop is the shortest on the city's list, and Ferril Lake's 0.9 mile is a short walk inside City Park. Cheesman's two loops fit a 1.1 or 1.4 mile outing. For a longer run, Washington Park, Sloan's Lake and the Mile High Loop run 2.5 to 3.1 miles. Construction in Cheesman Park and City Park affects picnic and bandstand areas, so check the city's project pages before a group outing or a permitted event.

Sources